Bambu Lab Build Plate X1 Carbon PEI Plate bamboo plate lab 257x257mm build plate A1 X1 for bambu lab P1S P1P smooth pei

Advantage:

Material:PEI film is 0.2mm thick,Made in Europe,the Steel plate is 0.5mm thick.

Size: 257.5 x257.5mm/10.14x10.14inch PEI Build Plate is suitable for BambuLab X1 and similar size 3D printers. Perfect for PLA, ABS,ext.

Stronger Magnetic Ddhesion:PEI 3d printer bed more flexible and resistant to bending.Great first-layer adhesion,make sure the model can be firmly attached to the surface of the print platform.ENERGETIC PEI bed platforms had solid adhesion and the print went well.

Easy Print Removal: PEI 3d printer platformis flexible and magnetic, making it easy to move off the platform and take away the printing model. The prints are pretty easy to remove once you're done printing.

Easy to Install:PEI spring steel sheet is flat and flexible, it comes without magnetic base, but could be magnetically attracted to the hotbed,becauseBambu Lab X1 3D printer heated bed is magnetic, just put and print.

Easy to Clean:PEI 3d printer bed adhesive use a soft cloth to clean the dust. Gently wipe the stain with low concentration of alcohol.

Package List：1 pc 257.5 x257.5mm Smooth PEI Spring Steel Build Plate

Notice:

Please tear off Smooth PEI surface’s Protective film before using it.

Important Information:

1.Recommend print temps

• PLA – 60C

• HTPLA – 60C

• PETG – 70-80C

• PCTG – 70-80C

• ABS – 100C

2.Product Usage Guidelines

• PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI

• Part Removal– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface

Product Display: